Skip to content

Monthly Archives: November 2016

Made my first coils ! Fused claptons.

Ok so I've made a couple just plain wire and wrapped <a href="” rel=”nofollow” target=”_blank”>coils. Got bored really fast lol. Decided to try to make some fused claptons. Used 2 strands of 26 g kanthal, claptoned with 36 gauge kanthal. No they ain't pretty I did it by hand , no drill. Yes it took […]

Is "Tiatanium TC" T1 wire?

No description if it's T1 or T2. + Titanium wire, not Tiatanium… A bit tired. <img src="” class=”mceSmilieSprite mceSmilie14″ alt=”;)” title=”Wink ;)” />

Does my first RDA build look okay?

i used premade twisted <a href="” rel=”nofollow” target=”_blank”>coils for it, but im not sure if it's normal. it's 0.18 ohms View attachment 617659

Recommended mod for cleito 120?

Hi I just bought the cleito 120 and i have the smok xpro m80 plus boxmod. but i wanna go higher than 80 watts, so i wanted to know what you guys would recommend for me

Protank 4

Total newbie..I purchased a protank4 today trying the rba which is dual coil …i built the first coil stuck in on deck read .7 built the second read .3 together..i was trying to build around a1.0 ohm coil ..any suggestions? Am i missing something

Noisy cricket 2 battery question

I have been running my noisy cricket 2 in dual parallel mode and when I go to swap out the batteries one always goes on the charger at about 3.7 V and the other at 4.19… Is it normal for them to drain unevenly like that?

Recommend me an a atty! :)

Hey guys. I'm soon about to buy new atty but I would really need some recommendation, because I'm little bit lost in all those atomizers. My specifications: – DIY. This. I was making my <a href="” rel=”nofollow” target=”_blank”>coils from beginning and I really don't like any changeable heads (bad experience and I need to save […]

Eleaf iPower Firmware and Logo Discussion

I was able to update the firmware and load the included logo file. So now I want my own custom logo, so I took the original logo file, opened and edited it with Gimp (like Photoshop). When I tried to load the logo onto my mod, it shows up all scrammbly! …! Anyone know why […]

Is the SONY VTC5 18650 batteries good for the SMOK Alien 220w?

looking to get this mod but im not sure what batteries to get. it says they have 20A continuous discharge.

Is the 13 Heavens 9 Hells clone a good first RDA?

i just ordered this rda along with some ceramic tweasers, and some 24g and 28g kanthal. and some premade <a href="” rel=”nofollow” target=”_blank”>coils incase i have a hard time at first making my own…